Development brief
Say whether the cloth is for a jacket, a trouser, another tailored piece, or an interior textile such as seating or a curtain weight. A silhouette photo can illustrate the idea. It does not replace the fibre, the weave and the width. If the room is humid, or the garment is pressed every wear, put that in the first lines so the later comparison has a setting.
A reference cutting or a clear construction description makes the request easier to read. Name wool, linen or a wool-silk-linen blend when that is what you have. Add the grams per square metre only with the unit and, if you know it, the tolerance, for example 260 g/m² with the tolerance written beside it. Separate usable width in centimetres from the full width. Mention the finish you can see, and the shade lot if one exists. A phone number, a street address and opening hours are not published for this desk, so the message itself has to carry the cloth facts. Unknown mill output, certificate numbers and client results stay off the note.
Tell us what you need to compare: hand against the current cutting, a cooler shade, a more open linen weave, or a width that suits the marker. Quantity and destination can follow in their own sentence. They do not confirm that a sample can be sent, and they do not set a delivery date. If a document is part of the decision, name the holder, the scope and the date rather than a logo.
A finished coat, a shoe or a bag is outside this desk. Keep the note on the cloth: the fibre blend you can name, the weave you can see, and the one change that would make the next cutting useful to judge.
| Line | Write this | Leave unknown |
|---|---|---|
| Use | Jacket, trouser or interior cloth, plus humidity or pressing if it matters | A silhouette used as the specification |
| Mass and width | For example 260 g/m² and the cuttable width in cm | A number without the unit |
| Composition | Wool, linen or wool-silk-linen, percentages toward 100% by mass when known | A fibre name treated as a certificate |
| Decision | The one change to judge on the next cutting | Stock, a minimum, a ship date or a client result |